Boot Archives

Winsage

April 27, 2026

Windows 11 KB5083769: The April Update may require the recovery key on certain BitLocker-enabled systems

The April update KB5083769 for Windows 11 versions 24H2 and 25H2, released on April 14, 2026, has a known issue where certain devices may enter BitLocker recovery mode after installation. This problem affects a limited subset of devices with specific, non-recommended BitLocker Group Policy settings. The issue arises when BitLocker is activated, a specific TPM platform validation policy is set to include PCR7, PCR7 binding is not feasible, the Windows UEFI CA 2023 certificate is present, and the device is not using the 2023-signed Windows Boot Manager. Microsoft advises organizations to review their BitLocker Group Policy settings and verify PCR7 binding status before deploying the update to prevent devices from requesting recovery keys. If the recovery prompt appears, users will need to enter the BitLocker recovery key, but subsequent reboots should not trigger the recovery process again if the Group Policy remains unchanged.

Winsage

April 27, 2026

Linux 7.1-rc1 brings faster, safer file transfers between Windows and Linux partitions with a brand new NTFS driver

Linus Torvalds has announced the closure of the merge window for Linux version 7.1, allowing public testing to begin with the first release candidate now available. This version includes a significant rewrite of the NTFS code aimed at improving dual-boot experiences between Windows and Linux. Additionally, Linux 7.1 will gradually phase out support for the i486 Intel processor and some older networking technologies and SoC configurations. Users can find the release candidate in Linus' Linux Git repository and are encouraged to report any bugs.

Winsage

April 25, 2026

Windows 11 KB5083769 causing a death loop on 24H2 and 25H2 systems

Microsoft's April 2026 Patch Tuesday update, KB5083769, has caused significant boot issues for Windows 11 users on versions 24H2 and 25H2. Users reported problems such as distorted visuals and the Blue Screen of Death after restarting post-update. The issue affects various hardware configurations, including HP and Dell systems. Additionally, the update may trigger BitLocker recovery on some systems, complicating recovery for users without their recovery key. Users have also experienced an increase in the number of restarts required during installation. Microsoft has not yet provided an emergency fix. Affected users are advised to use the Windows Recovery Environment for troubleshooting, including System Restore and Startup Repair. To check if KB5083769 is installed, users can go to Settings → Windows Update → Update history, and if present, it is recommended to uninstall it and pause updates.

Winsage

April 24, 2026

Windows 11 now shows if your Secure Boot certificates are ready for June

Windows 11 has introduced a feature that allows users to verify the status of their Secure Boot certificates directly from system settings, simplifying the process ahead of the June 2026 expiration deadline. This update enhances accessibility and empowers users to maintain system security against vulnerabilities. Secure Boot helps prevent unauthorized software and malware from loading during startup, and confirming certificate status can mitigate risks associated with system breaches.

Tech Optimizer

April 23, 2026

Take Control: Customer-Managed Keys for Lakebase Postgres

Encryption at rest is essential for cloud environments, especially in regulated sectors. Lakebase offers Customer Managed Keys (CMK), allowing organizations to control their encryption keys from preferred Key Management Services (KMS) like AWS KMS, Azure Key Vault, or Google Cloud KMS. Lakebase CMK manages both persistent storage and ephemeral compute, ensuring data security. Lakebase's architecture separates storage and compute layers, enabling elastic scaling and serverless operations. The storage layer maintains persistent data, while the compute layer consists of dynamic Postgres instances. This separation poses encryption challenges, addressed by Lakebase CMK through a hierarchical Envelope Encryption model. The key hierarchy includes: 1. Customer Managed Key (CMK): The Root of Trust in the cloud KMS, never accessed in plaintext by Databricks. 2. Key Encryption Key (KEK): A transient key for wrapping data keys. 3. Data Encryption Keys (DEKs): Unique keys for each data segment, stored in an encrypted state. When data access is needed, Lakebase retrieves DEKs by unwrapping keys from the KMS. If a key is revoked, access to the data is denied, and ephemeral compute instances are terminated. In practice, CMK applies to: 1. Persistence Layer (Storage): All data segments are encrypted with keys controlled by the CMK. 2. Ephemeral Layer (Compute): Each compute instance generates a unique ephemeral key, and upon revocation, the instance is terminated, destroying in-memory keys. CMK implementation follows a delegation model, allowing Security Admins to manage keys without accessing data. The process includes key configuration, workspace binding, and lifecycle management. Key rotation is seamless, requiring no data re-encryption. All cryptographic operations involving the CMK are logged by the cloud provider's audit service. Lakebase CMK is available for Enterprise tier customers, allowing organizations to manage their encryption keys effectively.

AppWizard

April 23, 2026

The best Dota 2 options and settings

In Dota 2, optimal settings are crucial for enhancing gameplay and performance. Key settings to prioritize include: - Hotkeys: - Quickcast Abilities for instant ability use. - Direct Key Bindings for customized control over abilities. - Unit Orders: - Auto Attack set to 'Standard' for automatic targeting. - Right-Click Allies to enable attacking friendly units. - Channels for managing teleport or channeled abilities. - Double-Tap to Self Cast for automatic self-use of abilities. - Disable Auto Attack When Stop is Held to prevent unintended movements. - Minimap: - Icons set to 'Hero with Arrow' for visibility. - Adjusted map position to reduce misclicks. - Use Extra Large Minimap for better visibility. - Minimap Hero Size between 100% and 130%. - Increased Minimap Misclick Protection Time. - Camera: - Center Camera on Hero on Respawn can be disabled. - Disable Camera Zoom to avoid accidental zooming. - Enable Screen Shake can be turned off if distracting. - Interface: - Show Ability Rangefinder While Casting for strategic planning. - Holding Alt Shows Neutral Spawnboxes and Tower Attack Range for quick checks. - Healthbars: - Visualize Damage/Healing can be turned off if distracting. - Display Names Over Healthbar switched to 'Hero Names' for easier tracking. - Miscellaneous: - Strict Solo Role Queue Matchmaking for solo players. - Network Quality set to Low for smoother gameplay. - Enable Console for expanded control. To set Dota 2 Launch Options, right-click the game in Steam, select 'properties,' and enter options in the text field. Recommended launch options include: - -autoconfig: Resets graphics settings. - -console: Enables console functionality. - -fullscreen: Forces fullscreen mode. - -high: Assigns high CPU priority. - -map dota: Loads the map in the background. - -noborder: Runs in borderless windowed mode. - -noprewarm: Disables resource loading at startup. - -novid: Skips the introductory video. - -safe_mode: Restores default rendering settings. - -useforcedmparms -noforcemaccel -noforcemspd: Adheres to Windows mouse settings. - -windowed: Runs in windowed mode. Players are encouraged to explore and experiment with these settings to optimize their individual playstyle.

Winsage

April 22, 2026

Google and Back Market Launch $3 ChromeOS Flex USB Kit for Windows 10 Users Locked Out of Windows 11

Google has launched a physical ChromeOS Flex USB Kit, priced at a modest amount, to support users on Windows 10 whose hardware does not meet Windows 11 requirements. This kit, developed with Back Market, is part of a pilot program with limited stock. The kit includes printed guides and video tutorials for installing ChromeOS Flex, which is available for free download. ChromeOS Flex allows devices to boot in under 10 seconds and primarily supports web browsing and cloud-based applications, but does not support Android applications. It consumes approximately 19 percent less energy than similar systems and aims to extend the lifespan of existing devices to reduce electronic waste. The kit is available through Back Market, but future production and pricing details have not been disclosed.

BetaBeacon

April 22, 2026

Now You Can Run GameCube and Wii Games on Switch Without Android

- Tico v0.7.0 update includes an experimental Dolphin core for GameCube and Wii emulation on the Switch. - The Dolphin core runs on Horizon OS via custom firmware, eliminating the need for a second operating system like Android or Linux. - Tico allows for automatic game library management and a controller-first interface for better handheld use. - Custom firmware is required to run Tico on a Nintendo Switch, with different methods depending on the Switch model. - GameCube and Wii games have been tested on Tico v0.7.0, with some titles running well and others experiencing minor issues.

Winsage

April 22, 2026

Microsoft Changes Windows Security After 15 Years—Update By ‘End Of April’

Microsoft is set to expire the Secure Boot authentication certificates that protect Windows PCs from threats upon each restart, with this initiative beginning in April 2023. The update will install new certificates and confirm if user action is necessary, with all devices expected to have the update by the end of April 2026. Users can check their Secure Boot status in Windows Security, where a badge system indicates the status. If the certificates expire, users may be at risk of boot-level malware. Microsoft is enhancing visibility of Secure Boot certificate status to aid user awareness. Users should check their PC by the end of the month to ensure it is updated.

Winsage

April 22, 2026

Microsoft Changes Windows Security After 15 Years—Update By ‘End Of April’

Microsoft is updating the Secure Boot certificates for Windows PCs, which have been in place since 2011. This update will begin with the April security patch rollout and is expected to be fully deployed across PCs by the end of April 2026. Users can check the status of the Secure Boot update by navigating to Windows Security > Device security > Secure Boot, where a color-coded badge will indicate the current status. The update will install new certificates and confirm if user action is necessary. If the badge is red, immediate attention is required. Microsoft is enhancing the visibility of the Secure Boot certificate status within Windows Security to aid users in verifying the update. The certificates will not expire for several more weeks, so users should check their systems by the end of the month.